Discuss the above safety issues and the proper use of bunk beds with your children, preferably on the first day. Camps that purchase 2000 beds should be aware of these requirements and ensure that they only purchase beds that meet the CPSC standard. Although the rule concerns the manufacture and sale of bunk beds after 1 July 2000, it should be examined whether current non-conforming beds can be safely modified to meet this standard when appropriately manufactured means and renovations are available. Mandatory manufacturer information on all bunk beds If you want your children to share a room, one of the most convenient ways to save space is to use bunk beds. If you have carpentry skills, you can even make your own, allowing you to make some adjustments. However, bunk beds can be very dangerous and many children – and even teenagers and adults – get injured every year. To protect your children, there are things you should do regarding the construction of the bed. The use of bunk beds and bunk beds is associated with some risk due to their increased construction. Every year, thousands of children under the age of 15 receive medical care for bunk bed injuries.
Most of the time, these are minor in nature and occur when children fall from the beds, but some potentially very serious dangers also lurk beneath the surface – the purpose of this guide is to help you avoid them and reduce the risk to a minimum. Are there any additional requirements for bunk beds? If you are building bunk beds, check for stains or sharp edges and remove or cover them for safety reasons. Make sure the mattress is the right size. A mattress that is too big or too small for the room presents a danger. The scale must be very stable and stable. You may want to add extra slats under the mattress in the top bunk to make sure it doesn`t fall out. Do not add hooks to the poles and prevent children from hanging scarves, belts or similar items from the bunk posts, as this poses a choking hazard. Each bunk bed must have an attached label indicating the manufacturer, model and size of the bed mattress and does not recommend placing children under the age of six on the top bunk. Railings prevent a child from getting out of bed at night.
They are mandatory for the upper berth, but if the lower berth is less than 30 inches, they are optional on the lower berth. You need to have one on each side, even if one side of the bed is on the wall. The one on the wall or in front of a ladder must go from one end of the bed to the other without pauses or gaps; It is better if it is attached to both ends, and if this is not the case, the distance between the end of the berth and the end of the rail can not be more than 0.22 inches. The other guardrail does not need to be continuous, which makes room for a ladder, but any space between the end of the bed and the end of the railing cannot exceed 15 inches. Guardrails should be difficult to remove so that they do not fall or fall and your child cannot remove them. The top of the railings should be at least five inches above the top of the mattress, so you need to know the thickness of the mattresses you will be using. Do not allow jumping or general horse play, especially on the top bunk – this is not an easy rule to apply, but you should insist, perhaps with an educational approach, try to teach children that brutal play on bunk beds is not safe. You can also consider using foam mattresses – since they don`t have springs, they take away the pleasure of jumping.
Some kind of supervision, especially if more children play together, is always a good measure if it is feasible. Requirements for adult bunk beds can be found under 16 CFR Part 1213, and requirements for children`s bunk beds can be set out under 16 CFR Part 1513. Openings in the structures of the lower floor should be small enough to prevent the penetration of a child`s head or torso, or large enough to allow free passage of the child`s head and torso. The first thing you need to make sure is that the product you want to buy meets the standards of the U.S. Consumer Product Safety Commission. Since the mid-2000s, this has been mandatory for all bunk beds sold in the United States. While it`s unlikely that any of the reputable stores will offer an item that doesn`t comply with regulations, it won`t cost you anything to insure. To the best of our knowledge and conviction, all products tested on this site comply with CPSC standards. Here are some excerpts from these requirements: In addition to the CPSC standard, there is a voluntary standard – ASTM F 1427-96 – that addresses other hazards, such as the structural integrity of foundations and guardrails.
